China Solar Pad mounted Transformer Manufacturer, Supplier, Factory

40.5KV 1600 amp Outdoor high-voltage SF6 circuit breaker is a three-phase AC 50HZ outdoor high-voltage switchgear suitable for the control and protection of 40.5KV transmission and transformation systems. It can also be used as a connecting circuit breaker and a combination of opening and closing devices. The LW8-40.5AG circuit breaker adopts the principle of "thermal expansion+auxiliary blowing" intelligent extinguish arcs, equipped with a CT10 spring operating mechanism. The circuit breaker complies with GB/T1984-2014 "AC High Voltage Circuit Breakers" and meets the requirements of the International Electrotechnical Commission standard IEC62271-100:2001 "High Voltage Switchgear and Control Equipment - Part 100: High Voltage AC Circuit Breakers".

The SC(B) series epoxy resin dry-type transformer has been meticulously designed to prioritize safety. Its flame-retardant, fire-proof, and explosion-proof features ensure the highest level of safety. The encapsulated winding allows for direct installation in the load center, providing a maintenance-free and pollution-free solution. The scientific and rational design, in combination with the casting process, yields a product with lower partial discharge, reduced noise, and superior heat dissipation capacity. When equipped with forced air cooling, it can operate for extended periods under a 125% rated load.

The ZW32 series 12kv ourdoor mv vcb vacuum circuit breaker, a versatile and reliable piece of equipment, is designed with the user's convenience in mind. With a rated voltage of 12kV and a three-phase alternating current of 50Hz, it efficiently opens and closes load current, overload current, and short circuit current in power systems. Its suitability extends to power distribution systems in substations, industrial and mining enterprises, and rural areas where the power grid is frequently operated. This circuit breaker's unique selling points include a compact design, lightweight construction, and anti-condensation properties. However, its most appealing feature is its low maintenance requirements, making it a cost-effective solution for your power distribution needs.

This circuit breaker is a multifunctional low-voltage protection device designed for distribution systems with AC 50Hz, rated voltage below 400V, and rated current below 63A. It is suitable for industrial, commercial, and civilian power networks. Its core functions integrate security protection, equipment protection, and intelligent monitoring, which can significantly improve the reliability and operation efficiency of the distribution system. Core functional highlights: 1. Safety protection 1) Personal safety assurance: Through high-precision residual current detection technology (RCD), indirect contact protection is provided, effectively reducing the risk of electric shock. 2) Equipment and line protection: Integrated overload and short circuit dual protection mechanism, accurately cutting off fault current, avoiding electrical fires and equipment damage. 2. Intelligent monitoring and early warning 1) Leakage pre-alarm function: Real-time monitoring of residual current in the circuit. When abnormal leakage (such as insulation degradation) is detected, an alarm signal is output through a passive normally open contact (dry contact). It can be linked to SCADA, fire protection system or sound and light alarm device without an external power supply to achieve early warning of faults and ensure power supply continuity. 2) Flexible threshold configuration: supports custom setting of leakage alarm values, adapting to sensitivity requirements of different scenarios (such as 30mA/100mA adjustable). 3. Diversified control ability Line and motor control: suitable for occasional switching operations of distribution lines or intermittent start-stop control of small motors, meeting the requirements of nonfrequent operation scenarios. Typical application scenarios: 1) Key power supply areas: places with high requirements for power continuity, such as data centers and hospital IT systems, have alarm nontrip mechanisms to avoid accidental power outages. 2) Equipment protection: Front-end protection for devices such as frequency converters and outdoor electrical cabinets that are susceptible to electrical leakage or environmental impact. 3) Intelligent operation and maintenance: By connecting to the building management system (BMS) through touch signals, remote monitoring and preventive maintenance can be achieved. Product advantages: 1) High reliability: thermal magnetic double trip structure, balancing overload delay protection and short-circuit instantaneous action characteristics. 2) Flexible expansion: an optional communication module, supporting remote status monitoring and fault diagnosis. 3) Easy installation: Standardized modular design, compatible with mainstream rail installation, suitable for compact distribution boxes. Summary: This circuit breaker is designed with the concept of "warning first, safety oriented", which ensures the safety of personnel and equipment while maximizing the stability of system operation. It is the preferred protective device for modern intelligent distribution systems.

KXAHLX Photovoltaic AC Combinerbox is an important power protection part suitable for series photovoltaic power generation systems, which is used to connect series inverters and power grid systems.

The GW5 outdoor isolation switch is a high-voltage electrical device designed to meet specific structural requirements. It consists of three independent single-phase isolation switches, making it a versatile and reliable option for various applications. The device complies with the standards outlined in the JB520-64 "AC High Voltage Isolation Switch" and features an additional grounding knife device for added safety. The CS-G manual operating mechanism is available in three variations: ungrounded, single-grounded, and double-grounded, providing users with options to suit their needs.