China Outdoor HV surge arresters Manufacturer, Supplier, Factory

KXAHLX Photovoltaic AC Combinerbox is an important power protection part suitable for series photovoltaic power generation systems, which is used to connect series inverters and power grid systems.

The CFB3 series miniature circuit breaker is suitable for overload and short circuit protection in AC 50/60Hz, rated voltage up to 230V/400V, and rated current up to 125A lines. It can also be used for infrequent on/off operations of the line under normal conditions. The CFB3-63 series circuit breaker is equipped with accessories such as CFB3-F auxiliary contacts, CFB3-FB auxiliary alarm contacts, CFB3-FL shunt release, CFB3-QY undervoltage release, CFB3-GY overvoltage release, CFB3-GQY overvoltage release, etc., providing convenience for the intelligent control of smart buildings. Overvoltage, undervoltage, and overvoltage/undervoltage are electronic release devices that are assembled and combined with circuit breakers or residual current circuit breakers. They are suitable for AC 50Hz/60Hz circuits with a rated voltage of 230V, and are used to protect against overvoltage, undervoltage, and overvoltage caused by line faults, avoiding damage to electrical equipment or inability to function properly due to fluctuations in grid voltage. The circuit breaker has an isolation function. Compliant with standards: GB/T10963.1, IEC60898-1, GB/T20645.

ZCW10-40.5G /T1600-31.5 Outdoor high-voltage SF6 open type combination electrical appliances is a complete set of units using air as external insulation SF 6 gas as arc extinguishing medium Combined electrical appliances.The control and protection of the three-phase AC 40.5kV transmission anddistribution system can also be used to connect circuit breakers and open and close capacitor banks.Suitable for the land shortage of urban substation, enterprise substation, mountain substation.

This series of miniature circuit breakers consists of a plastic casing, overcurrent release, operating mechanism, contacts, and arc extinguishing system. The shell is made of high-strength and highly flame-retardant plastic. A multi-pole circuit breaker is assembled from multiple single poles, with the release connected by a linkage rod and the handle connected by a linkage cover, ensuring consistency in the on-off of each pole.

36KV Centre-break Two Post Isolating Switch is crafted from high-strength porcelain, which enhances the product's stability, reliability, and strength density. This material formulation minimizes strength variation and boosts the product's tensile strength. The structural layout includes a significant margin of strength, ensuring the product's operational stability and dependability.

The SC(B) series epoxy resin dry-type transformer has been meticulously designed to prioritize safety. Its flame-retardant, fire-proof, and explosion-proof features ensure the highest level of safety. The encapsulated winding allows for direct installation in the load center, providing a maintenance-free and pollution-free solution. The scientific and rational design, in combination with the casting process, yields a product with lower partial discharge, reduced noise, and superior heat dissipation capacity. When equipped with forced air cooling, it can operate for extended periods under a 125% rated load.