China variable frequency drive single phase to 3 phase Manufacturer, Supplier, Factory

The CFB3 series miniature circuit breaker is suitable for overload and short circuit protection in AC 50/60Hz, rated voltage up to 230V/400V, and rated current up to 125A lines. It can also be used for infrequent on/off operations of the line under normal conditions. The CFB3-63 series circuit breaker is equipped with accessories such as CFB3-F auxiliary contacts, CFB3-FB auxiliary alarm contacts, CFB3-FL shunt release, CFB3-QY undervoltage release, CFB3-GY overvoltage release, CFB3-GQY overvoltage release, etc., providing convenience for the intelligent control of smart buildings. Overvoltage, undervoltage, and overvoltage/undervoltage are electronic release devices that are assembled and combined with circuit breakers or residual current circuit breakers. They are suitable for AC 50Hz/60Hz circuits with a rated voltage of 230V, and are used to protect against overvoltage, undervoltage, and overvoltage caused by line faults, avoiding damage to electrical equipment or inability to function properly due to fluctuations in grid voltage. The circuit breaker has an isolation function. Compliant with standards: GB/T10963.1, IEC60898-1, GB/T20645.

126KV 1250A Neutral point disconneetor is specifically engineered for application in high-voltage transmission lines operating under no-load conditions. Its primary function is to provide electrical isolation during the maintenance of circuit breakers and other associated equipment, thereby ensuring compliance with insulation distance requirements and enhancing overall operational safety.

In recent years, the field of engineering construction has faced increasing complexity due to advancements in technology and the growth of society and the economy. There is a rising demand for compact switch equipment that is smart and requires minimal maintenance. Both local and global manufacturers of switches are currently focusing on the development of 12KV 2500A Sf6 Sulfur Hexafluoride Infiilled Electrical Switchgear, also referred to as gas-insulated switchgear (C-GIS). These C-GIS systems encase high-voltage components like busbars, circuit breakers, isolating switches, and power cables in a housing with reduced gas pressure.

126KV Outdoor high-voltage SF6 ceramic column circuit breaker is a high-voltage sulfur hexafluoride device used in outdoor electrical systems operating at 126kV. It is designed to manage and safeguard power transmission and transformation networks. This breaker can serve as a switch and disconnection unit when needed. The breaker's innovative arc extinguishing technique involves thermal expansion and auxiliary blowing, and it incorporates a CTB-1 operating mechanism. It complies with the GB1984-2003 standard for AC High Voltage Circuit Breakers and ful specifications of the IEC62271-100:2001 standard for High Voltage Switchgear and Control Equipment Part 100: High Voltage AC Circuit Breakers established by the International Electrotechnical Commission.

BWG Photovoltaic grid connected cabinet is an important component that undertakes centralized inverters and step-up transformers or AC combiner box step-up transformers. The incoming line of this photovoltaic grid connected cabinet uses a short-circuit breaker input or direct input, and the output uses a circuit breaker or load isolation switch. The busbar is connected with electroplated or purified wire, and provides secondary lightning protection. The maximum rated voltage of the system is AC690V, and the protection level is | P40 indoors and | P65 outdoors; The cables for secondary measurement and control include cables with a current greater than 2.5mm2, cables with a voltage of 1.5mm2, and cables with a control voltage greater than 1.0mm2. The measuring current transformer is a current transformer of level 0.5, and the measuring current transformer is a current transformer of level 0.25. Relevant functions can also be added according to customer requirements. This product adopts professional electrical design, is simple, beautiful, convenient for on-site wiring and maintenance, and ensures long-term stable operation of the equipment.

The advancement of society, economy, and technology has led to the escalating intricacy of engineering construction in recent years. This has resulted in a growing demand for compact, maintenance-free, and intelligent switch products. Domestic and foreign switch manufacturers are actively developing 12KV 630A MV Gas Insulated Power Distribution Switchgear (C-GIS), also known as gas-insulated switchgear. Gas-insulated switchgear is a type of equipment that encloses high-voltage components like busbars, circuit breakers, isolating switches, and power cables within a shell, which maintains a lower gas pressure.