China Ring main unit distribution Manufacturer, Supplier, Factory

The DZ20 series plastic shell circuit breaker (hereinafter referred to as the circuit breaker) is suitable for distribution lines with AC 50Hz, rated current up to 1250A, rated insulation voltage of 660V, rated working voltage of 380V (400V) and below, as overload, short circuit and undervoltage protection for distributed electrical energy, lines and power equipment. Among them, the Y, J, and G type circuit breakers with rated currents of 225A and Y type 400A can also be used to protect motors. Under normal circumstances, the circuit breaker can be used for infrequent switching of lines and infrequent starting of motors. The product meets the standards of JB8589, GB14048.2, and IEC947-2.

The The GW8 series neutral point disconnecting switch is an outdoor device designed for use with AC 50Hz and 60Hz. It is intended to connect the neutral point of a transformer under no load conditions. The switch can be easily operated using either the CJ motor operating mechanism or the CS8 manual operating mechanism. Comprising a monopole and an operating mechanism, the GW8 series ensures smooth and hassle-free operation. The monopole includes a base, post-insulator, conductive arm, contact, and other components. The operating mechanism, whether it's the CJ motor operating mechanism or the CS8 manual operating mechanism, is crucial to the disconnecting switch process. It drives the conductive arm through the connecting rod, enabling the opening and closing of the disconnecting switch. is an outdoor device designed for use with AC 50Hz and 60Hz. It is intended to connect the neutral point of a transformer under no load conditions. The switch can be easily operated using either the CJ motor operating mechanism or the CS8 manual operating mechanism. Comprising a monopole and an operating mechanism, the GW8 series ensures smooth and hassle-free operation. The monopole includes a base, post-insulator, conductive arm, contact, and other components. The operating mechanism, whether it's the CJ motor operating mechanism or the CS8 manual operating mechanism, is crucial to the disconnecting switch process. It drives the conductive arm through the connecting rod, enabling the opening and closing of the disconnecting switch.

BWG Photovoltaic grid connected cabinet is an important component that undertakes centralized inverters and step-up transformers or AC combiner box step-up transformers. The incoming line of this photovoltaic grid connected cabinet uses a short-circuit breaker input or direct input, and the output uses a circuit breaker or load isolation switch. The busbar is connected with electroplated or purified wire, and provides secondary lightning protection. The maximum rated voltage of the system is AC690V, and the protection level is | P40 indoors and | P65 outdoors; The cables for secondary measurement and control include cables with a current greater than 2.5mm2, cables with a voltage of 1.5mm2, and cables with a control voltage greater than 1.0mm2. The measuring current transformer is a current transformer of level 0.5, and the measuring current transformer is a current transformer of level 0.25. Relevant functions can also be added according to customer requirements. This product adopts professional electrical design, is simple, beautiful, convenient for on-site wiring and maintenance, and ensures long-term stable operation of the equipment.

The CFB3 series miniature circuit breaker is suitable for overload and short circuit protection in AC 50/60Hz, rated voltage up to 230V/400V, and rated current up to 125A lines. It can also be used for infrequent on/off operations of the line under normal conditions. The CFB3-63 series circuit breaker is equipped with accessories such as CFB3-F auxiliary contacts, CFB3-FB auxiliary alarm contacts, CFB3-FL shunt release, CFB3-QY undervoltage release, CFB3-GY overvoltage release, CFB3-GQY overvoltage release, etc., providing convenience for the intelligent control of smart buildings. Overvoltage, undervoltage, and overvoltage/undervoltage are electronic release devices that are assembled and combined with circuit breakers or residual current circuit breakers. They are suitable for AC 50Hz/60Hz circuits with a rated voltage of 230V, and are used to protect against overvoltage, undervoltage, and overvoltage caused by line faults, avoiding damage to electrical equipment or inability to function properly due to fluctuations in grid voltage. The circuit breaker has an isolation function. Compliant with standards: GB/T10963.1, IEC60898-1, GB/T20645.

The advancement of society, economy, and technology has led to the escalating intricacy of engineering construction in recent years. This has resulted in a growing demand for compact, maintenance-free, and intelligent switch products. Domestic and foreign switch manufacturers are actively developing 12KV 630A MV Gas Insulated Power Distribution Switchgear (C-GIS), also known as gas-insulated switchgear. Gas-insulated switchgear is a type of equipment that encloses high-voltage components like busbars, circuit breakers, isolating switches, and power cables within a shell, which maintains a lower gas pressure.

The KYN28-12(Z) 7.2KV 1600A High Current Power Distribution Cabinet Switchgear is designed for 12kV rated voltage and 50Hz rated frequency in three-phase AC power systems. This equipment is utilized to manage the reception, distribution, control, protection, and monitoring of electrical circuits.