China Outdoor isolating switch disconnect Manufacturer, Supplier, Factory

The CFB3 series miniature circuit breaker is suitable for overload and short circuit protection in AC 50/60Hz, rated voltage up to 230V/400V, and rated current up to 125A lines. It can also be used for infrequent on/off operations of the line under normal conditions. The CFB3-63 series circuit breaker is equipped with accessories such as CFB3-F auxiliary contacts, CFB3-FB auxiliary alarm contacts, CFB3-FL shunt release, CFB3-QY undervoltage release, CFB3-GY overvoltage release, CFB3-GQY overvoltage release, etc., providing convenience for the intelligent control of smart buildings. Overvoltage, undervoltage, and overvoltage/undervoltage are electronic release devices that are assembled and combined with circuit breakers or residual current circuit breakers. They are suitable for AC 50Hz/60Hz circuits with a rated voltage of 230V, and are used to protect against overvoltage, undervoltage, and overvoltage caused by line faults, avoiding damage to electrical equipment or inability to function properly due to fluctuations in grid voltage. The circuit breaker has an isolation function. Compliant with standards: GB/T10963.1, IEC60898-1, GB/T20645.

The DZ20 series plastic shell circuit breaker (hereinafter referred to as the circuit breaker) is suitable for distribution lines with AC 50Hz, rated current up to 1250A, rated insulation voltage of 660V, rated working voltage of 380V (400V) and below, as overload, short circuit and undervoltage protection for distributed electrical energy, lines and power equipment. Among them, the Y, J, and G type circuit breakers with rated currents of 225A and Y type 400A can also be used to protect motors. Under normal circumstances, the circuit breaker can be used for infrequent switching of lines and infrequent starting of motors. The product meets the standards of JB8589, GB14048.2, and IEC947-2.

In recent years, with the advancement of technology and the growth of society and the economy, engineering construction has become increasingly intricate. There is a rising demand for compact switch equipment that is low-maintenance and smart. Domestic and international switch manufacturers are working on the 35KV 2500A Medium Voltage High Current Electrical Switchgear Gis, referred to as gas-insulated switchgear (C-GIS). These switchgear systems encase high-voltage components like busbars, circuit breakers, isolating switches, and power cables in a shell with reduced gas pressure.

Elevate your power infrastructure with Kexunan's cutting-edge 35KV High Voltage Environmentally Friendly Combined Substation. Engineered in China, our substations stand out for their durability and customizable features. Committed to environmental responsibility, we offer solutions that not only meet high voltage demands but also align with sustainability goals. Choose Kexunan for a robust, eco-friendly, and tailored approach to your power distribution needs.

ZCW10-40.5G /T1600-31.5 Outdoor high-voltage SF6 open type combination electrical appliances is a complete set of units using air as external insulation SF 6 gas as arc extinguishing medium Combined electrical appliances.The control and protection of the three-phase AC 40.5kV transmission anddistribution system can also be used to connect circuit breakers and open and close capacitor banks.Suitable for the land shortage of urban substation, enterprise substation, mountain substation.

This American type prefabricated substation is developed by absorbing the latest advanced technology from abroad and combining it with the actual situation in China. The entire product has the characteristics of small size, easy installation and maintenance, low noise, low loss anti-theft, strong overload capacity, and full protection. Suitable for newly built residential green belts, parks, stations, hotels, construction sites, airports, and other places.