China Outdoor electrical control breaker Manufacturer, Supplier, Factory

The ZN85-40.5/40.5KV Indoor High Voltage Vacuum Circuit Breaker for switchgear, designed for use in AC 50Hz systems with a rated voltage of 40.5kV, is a durable solution for switching load current, overload current, and fault current in industrial and mining facilities, power plants, and substations. Its upper and lower layout structure, reducing its overall depth, is a testament to its durability. The specially designed spring operating mechanism, tailored to suit the upper and lower layout configuration, ensures simplicity, optimal output curve, and performance that aligns with the requirements of 40.5kV vacuum circuit breakers. This circuit breaker's ability to handle frequent operation and its resilience in harsh operating conditions in various environments instill confidence in its durability.

The CFB3 series miniature circuit breaker is suitable for overload and short circuit protection in AC 50/60Hz, rated voltage up to 230V/400V, and rated current up to 125A lines. It can also be used for infrequent on/off operations of the line under normal conditions. The CFB3-63 series circuit breaker is equipped with accessories such as CFB3-F auxiliary contacts, CFB3-FB auxiliary alarm contacts, CFB3-FL shunt release, CFB3-QY undervoltage release, CFB3-GY overvoltage release, CFB3-GQY overvoltage release, etc., providing convenience for the intelligent control of smart buildings. Overvoltage, undervoltage, and overvoltage/undervoltage are electronic release devices that are assembled and combined with circuit breakers or residual current circuit breakers. They are suitable for AC 50Hz/60Hz circuits with a rated voltage of 230V, and are used to protect against overvoltage, undervoltage, and overvoltage caused by line faults, avoiding damage to electrical equipment or inability to function properly due to fluctuations in grid voltage. The circuit breaker has an isolation function. Compliant with standards: GB/T10963.1, IEC60898-1, GB/T20645.

KXAHLX Photovoltaic AC Combinerbox is an important power protection part suitable for series photovoltaic power generation systems, which is used to connect series inverters and power grid systems.

This circuit breaker is a multifunctional low-voltage protection device designed for distribution systems with AC 50Hz, rated voltage below 400V, and rated current below 63A. It is suitable for industrial, commercial, and civilian power networks. Its core functions integrate security protection, equipment protection, and intelligent monitoring, which can significantly improve the reliability and operation efficiency of the distribution system. Core functional highlights: 1. Safety protection 1) Personal safety assurance: Through high-precision residual current detection technology (RCD), indirect contact protection is provided, effectively reducing the risk of electric shock. 2) Equipment and line protection: Integrated overload and short circuit dual protection mechanism, accurately cutting off fault current, avoiding electrical fires and equipment damage. 2. Intelligent monitoring and early warning 1) Leakage pre-alarm function: Real-time monitoring of residual current in the circuit. When abnormal leakage (such as insulation degradation) is detected, an alarm signal is output through a passive normally open contact (dry contact). It can be linked to SCADA, fire protection system or sound and light alarm device without an external power supply to achieve early warning of faults and ensure power supply continuity. 2) Flexible threshold configuration: supports custom setting of leakage alarm values, adapting to sensitivity requirements of different scenarios (such as 30mA/100mA adjustable). 3. Diversified control ability Line and motor control: suitable for occasional switching operations of distribution lines or intermittent start-stop control of small motors, meeting the requirements of nonfrequent operation scenarios. Typical application scenarios: 1) Key power supply areas: places with high requirements for power continuity, such as data centers and hospital IT systems, have alarm nontrip mechanisms to avoid accidental power outages. 2) Equipment protection: Front-end protection for devices such as frequency converters and outdoor electrical cabinets that are susceptible to electrical leakage or environmental impact. 3) Intelligent operation and maintenance: By connecting to the building management system (BMS) through touch signals, remote monitoring and preventive maintenance can be achieved. Product advantages: 1) High reliability: thermal magnetic double trip structure, balancing overload delay protection and short-circuit instantaneous action characteristics. 2) Flexible expansion: an optional communication module, supporting remote status monitoring and fault diagnosis. 3) Easy installation: Standardized modular design, compatible with mainstream rail installation, suitable for compact distribution boxes. Summary: This circuit breaker is designed with the concept of "warning first, safety oriented", which ensures the safety of personnel and equipment while maximizing the stability of system operation. It is the preferred protective device for modern intelligent distribution systems.

The GW5 outdoor isolation switch is a high-voltage electrical device designed to meet specific structural requirements. It consists of three independent single-phase isolation switches, making it a versatile and reliable option for various applications. The device complies with the standards outlined in the JB520-64 "AC High Voltage Isolation Switch" and features an additional grounding knife device for added safety. The CS-G manual operating mechanism is available in three variations: ungrounded, single-grounded, and double-grounded, providing users with options to suit their needs.

KYN28-12(Z) AC metal armored switchgear 3.6KV 2000A High Current Switchgear Electrical Equipment is a versatile and reliable solution for managing three-phase AC power systems with a rated voltage of 12kV and a frequency of 50Hz. Its primary function is to efficiently distribute and control electric energy, while also providing protective measures and monitoring capabilities to ensure the safety and efficiency of the system.