China HV circuit breaker for industrial use Manufacturer, Supplier, Factory

The CFB3 series miniature circuit breaker is suitable for overload and short circuit protection in AC 50/60Hz, rated voltage up to 230V/400V, and rated current up to 125A lines. It can also be used for infrequent on/off operations of the line under normal conditions. The CFB3-63 series circuit breaker is equipped with accessories such as CFB3-F auxiliary contacts, CFB3-FB auxiliary alarm contacts, CFB3-FL shunt release, CFB3-QY undervoltage release, CFB3-GY overvoltage release, CFB3-GQY overvoltage release, etc., providing convenience for the intelligent control of smart buildings. Overvoltage, undervoltage, and overvoltage/undervoltage are electronic release devices that are assembled and combined with circuit breakers or residual current circuit breakers. They are suitable for AC 50Hz/60Hz circuits with a rated voltage of 230V, and are used to protect against overvoltage, undervoltage, and overvoltage caused by line faults, avoiding damage to electrical equipment or inability to function properly due to fluctuations in grid voltage. The circuit breaker has an isolation function. Compliant with standards: GB/T10963.1, IEC60898-1, GB/T20645.

The FWM8-12 Environmental Friendly Gas Insulated Ring Main Unit is a complete set of distribution equipment with a 12KV, three-phase AC 50Hz, and single busbar segmented system. This product has the characteristics of simple structure, flexible operation, reliable interlocking, and convenient installation. It can provide satisfactory technical solutions for various applications and users. The application of sensing technology and information technology, combined with advanced technological performance and simple and flexible configuration schemes, can meet the constantly changing needs of the market and be suitable for the intelligent requirements of the power grid.

The HXGN-12 switchgear Medium voltage AC metal ring main unit switchgear is a comprehensive set of high-voltage AC devices designed for use in three-phase AC ring networks, terminal distribution networks, and industrial electrical systems. Rated for 3.6-12kV and 50Hz, it serves as a reliable and protective solution for receiving, distributing, and regulating electricity. This product adheres to national standards GB3906 and IEC60298, as well as DL/T402 and DL/T404 standards, and meets the "five prevention" locking requirements, ensuring maximum safety and efficiency in its operation.

This circuit breaker is a multifunctional low-voltage protection device designed for distribution systems with AC 50Hz, rated voltage below 400V, and rated current below 63A. It is suitable for industrial, commercial, and civilian power networks. Its core functions integrate security protection, equipment protection, and intelligent monitoring, which can significantly improve the reliability and operation efficiency of the distribution system. Core functional highlights: 1. Safety protection 1) Personal safety assurance: Through high-precision residual current detection technology (RCD), indirect contact protection is provided, effectively reducing the risk of electric shock. 2) Equipment and line protection: Integrated overload and short circuit dual protection mechanism, accurately cutting off fault current, avoiding electrical fires and equipment damage. 2. Intelligent monitoring and early warning 1) Leakage pre-alarm function: Real-time monitoring of residual current in the circuit. When abnormal leakage (such as insulation degradation) is detected, an alarm signal is output through a passive normally open contact (dry contact). It can be linked to SCADA, fire protection system or sound and light alarm device without an external power supply to achieve early warning of faults and ensure power supply continuity. 2) Flexible threshold configuration: supports custom setting of leakage alarm values, adapting to sensitivity requirements of different scenarios (such as 30mA/100mA adjustable). 3. Diversified control ability Line and motor control: suitable for occasional switching operations of distribution lines or intermittent start-stop control of small motors, meeting the requirements of nonfrequent operation scenarios. Typical application scenarios: 1) Key power supply areas: places with high requirements for power continuity, such as data centers and hospital IT systems, have alarm nontrip mechanisms to avoid accidental power outages. 2) Equipment protection: Front-end protection for devices such as frequency converters and outdoor electrical cabinets that are susceptible to electrical leakage or environmental impact. 3) Intelligent operation and maintenance: By connecting to the building management system (BMS) through touch signals, remote monitoring and preventive maintenance can be achieved. Product advantages: 1) High reliability: thermal magnetic double trip structure, balancing overload delay protection and short-circuit instantaneous action characteristics. 2) Flexible expansion: an optional communication module, supporting remote status monitoring and fault diagnosis. 3) Easy installation: Standardized modular design, compatible with mainstream rail installation, suitable for compact distribution boxes. Summary: This circuit breaker is designed with the concept of "warning first, safety oriented", which ensures the safety of personnel and equipment while maximizing the stability of system operation. It is the preferred protective device for modern intelligent distribution systems.

The ZW43-12 series 12kv 630A Outdoor Automatical Vacuum Circuit Breaker are designed for outdoor use, with a rated voltage of 12kV and a frequency of 50Hz. These breakers are highly efficient, handling load currents, overload currents, and short circuit currents in power systems with ease. They are particularly suited for substations, industrial and mining establishments, and urban and rural distribution networks, where they provide protection and control, especially in applications that require frequent operation and automation. These breakers comply with several standards, including GB/T1984 for high-voltage AC circuit breakers, GB/T11022 for high-voltage switchgear and control equipment, and D1402 for AC high-voltage circuit breaker ordering technical conditions. Additionally, the circuit breaker can be paired with a controller to form a coordinated device, enabling remote control, monitoring, communication, and adjustment capabilities.

72.5KV 4000A Horizontal or Vertical knee-type disconnector features a compact design, modern aesthetic, and sleek appearance. It is reliable, efficient, and economical, with a space-saving vertical contact system that adapts to varying heights. The terminal block and conductive rod are crafted from high-quality aluminum alloy and aluminum alloy sections, offering excellent strength, durability, and resistance to corrosion.